Hueforge Balatro Themed Card

Hueforge color blended balatro cards, feature 8-color filament printing with embossed details.

 

My filament switch settings for reference, feel free to experiment!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 40x53.52mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.5
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA BambuLab Basic Red Transmission Distance: 1
    PLA Jessie Premium Yellow Bird Transmission Distance: 4
    PLA BambuLab Matte Ice Blue Transmission Distance: 1
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Marine Blue
    At layer #17 (1.44mm) swap to Red
    At layer #19 (1.6mm) swap to Yellow Bird
    At layer #21 (1.76mm) swap to Ice Blue
    At layer #23 (1.92mm) swap to Silver
    At layer #24 (2mm) swap to Jade White for the rest.
 

Boost Me