February 3, 2024
Description
2024.05.15 更新版/Updated version on May 15th, 2024
https://makerworld.com/zh/models/707250#profileId-637293
----------------------------------------------------------------------------------------------------------------
0.2层高 填充 10% 螺旋填充 无支撑打印
0.2 layer height filled with 10% spiral filling, unsupported printing
缩小尺寸避免悬垂可以适当调整外墙打印速度60-90区间最佳。
Reducing the size to avoid overhanging can be adjusted appropriately. The best printing speed for the exterior wall is in the 60-90 range
Dragon ornaments
以下为 降速90外墙效果（模型缩小了45%）
The following is the 90 degree reduction in exterior wall effect (the model has been reduced by 45%)
License:
BY-SA
Syxiaolu94
