Choco Bunny Fidget Clicker

A cute fidget clicker with a bunny face sinking into a chocolate cake!

Available with or without a keyring loop. Play with colors to make strawberry 🍓, lemon 🍋 or any flavor you like.

Designed for multicolor printing (AMS required).
No supports were used on the bunny head in my test prints, but feel free to use them if you prefer.

-

Updated – March 15, 2026

Based on some helpful feedback, I updated the model with a stronger cross shaped connector on the bunny head, making the part that attaches to the Cherry MX style switch more durable during printing and assembly.

-

Assembly:
Print both parts: the cake base and the bunny head.
You can start with either part, but the cross shaped peg will always go in the bunny head.
Insert a Cherry-style keycap switch (square stem) into the cross shaped peg inside the bunny head.
Then press the switch (now attached to the head) into the square hole in the cake base.
You can add a small drop of glue to the peg and inside the base for a more secure fit — just don’t overdo it to avoid glue overflow.

You will need a Cherry MX–style mechanical keyboard switch. 

⚠️ I used a square edged switch like in the photo, but I also tested with a smooth edged one and it worked fine. Make sure to check your switch model before assembling!


⌨️ ✨ For those who aren’t sure which switch to get:
I use a Cherry MX–style mechanical keyboard switch. It has a small cross-shaped stem on top where my models attach. You can find these switches in mechanical keyboard stores, electronics shops, or DIY keyboard sites. I can’t include a link here, but I’ve added a photo for reference.
 

Enjoy your cute little clicker! 💖

🌸 License Notice

Personal use only. 
Any commercial use including selling physical products, giveaways, freebies, subscriber rewards, or promotional use requires a Commercial License. A Commercial License is available here: https://bluveriestudio.gumroad.com/