Brass media sorter

With wet tumbling is's always difficult to separate the stainless steal pins from the brass.

This is a double sifter for first sift up from 8mm and bigger.

Smaller parts go through.

The second sifter is 2mm and keeps the stainles pins from 2.5mm insite.

the second sifter is screwed underneath the 8mm sifter and keep the pins nice together when you rinse your brass, so nothing  is getting lost.

the bucket you can put afterwards underneath to catch the last water and can also be used as a lit on the big bucket sifter from 8mm to husle the shells so the pins faling outside the shells.

Also it drying the pins easy.

I use PETG for water resistend. 

The size of the black bin is 180mm hight and diameter 188mm.

Yes i know its a long print and a lot of filament but buying one is more expensive and don't work as good.