CHEEZ-IT Slip and Slide Fidget (30 mins) Cheese

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

Cheez-It Slip & Slide Fidget 🧀🌀

This fidget is cheesy in all the right ways. Inspired by one of our favorite snacks and the name of one of our 3D printers (yes, really), the Cheez-It Slip & Slide is here to bring salty, crunchy joy to your fingertips. It slips, slides, twists, and flips faster than you can say “pass the box!” 🍪

Single color and prints in <30 minutes and 9 grams — which is way less than the amount of Cheez-Its you’ll eat while it’s printing. 

Warning: May cause sudden snack cravings. Snack responsibly. 🧀🔥