Check out my Stackable CD rack
Despite what the preview says, the print only takes 8g of filament and 15 minutes of your printer's time.
Showcase your favorite CD or use it as a temporary holding stand for the current ‘Now Playing’ CD.
This is a custom-designed display stand specifically designed for standard CD jewel cases, created to showcase album artwork as a "now playing" stand or general collection display. The stand features a clean, minimalist L-shaped profile that elegantly supports CDs at an optimal viewing angle.
Designer recommendation: I recommend using 0.4mm tolerance versions (recommend 20deg) first - 0.2mm is very precise and kind of tight, suits well for a “Showcase” stand where the CD doesn't change often. For Digipak profile I found most normal digipak cases to fit into the 5mm slot very nicely.
- Multiple angle options: Available in 20° and 30° display angles to suit different viewing preferences and display locations. I recommend using 20° for above waist showcase, 30° for below waist showcase.
- Multiple tolerances options in 3mf file: Published with 0.2mm, 0.4mm and 0.6mm tolerance variants to accommodate slight variations in jewel case dimensions and printing accuracy.
- Designed to support all standard CD jewel cases with the typical 10mm thickness
- Clean aesthetic: Simple, functional design that doesn't distract from the album artwork
- Stable base: Wide footprint ensures secure support for CDs without tipping
- Low filemant usage: Only 8-10g per model
Changelog
23/08/2025
- Added 0.6mm tolerance versions for less dialed-in printers
- Changed the 3mf file colors to represent different tolerances better
- Added profile for Digipak support - 5mm and 6mm gap
kalmaarikalmer
