Windmill Halfcircle 1-2-3 propellers

Windmill Halfcircle version with 1-2-3 propellers.

 

You can make the model with 1, 2 or 3 propellers. If you want to keep it simple, use only 1-2 propellers, but the 3-propeller solution is really beautiful. The kids will love it. Use as many colors as possible. Don't need AMS!
The stars spin, which creates a very nice effect when the wind blows.

You can print turbines with a diameter of 180 and 140 mm with the A1 mini printer. Put grease between the turbines and the shaft.

You need to place 1 spacer between the turbines. The stems and parts are designed to be printed horizontally. The windmill has a stake that needs to be driven into the ground and fixed in place.

 

 

Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate.

 

My modells: my modells.

My windmill modells: my windmills

My clamp for my windmills: my clamp

If you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you can also support it with boost.

 

Boost Me

 

Print, use and enjoy!