Infinite seamless modular skadis boards

Boost MeBoost me, if you like the Skadis modular board design.

Pegboards compatible with the Ikea Skadis system. These boards can be linked seamlessly. No space is wasted between the separate boards.

 

There are different types of connectors: 

• One set for connecting boards using M3x10 screws. These have notches on the backside for M3 hex nuts.
• One set for direct wall mount. The holes have a diameter of 5 mm and no notch for M3 hex nuts. Comes with a 14 mm spacer.
• One extended set for connecting boards using M3x10 screws and for wall mount using a different hole above.
• One extended set for connecting boards using M3x10 screws and a small hook to attach it to a bathroom shelf (or similar).

There are boards with 40, 80, 120, 160, 200 and 240 mm width and various heights. Be aware that not all combinations/directions can be connected. 

 

If you want to print the 240 x 240 mm boards with a P1/X1 printer, you need to change the stock settings of the printer. First, you need to click on your printer model “Click to edit preset”:

This will open the “Printer settings”. You need to delete the default values for “Bed exclude area”. Just delete the values in the red box in the picture below. Then save the profile under a new name by clicking on the small disk icon. To print the 240x240 mm boards, you have to use the printer profile you just saved.

 

For better appearance there are also end pieces with a straight edge without cutouts, which you can find in a separate profile.

 

If you are looking for additional models, please leave a comment and I will look into it.

 

If you have a P1/P2/X1 printer, check out my model for a huge Skadis 320x240 mm board:

https://makerworld.com/en/models/2607084-infinite-skadis-pegboard-320-x-240-mm-for-p1-p2-x1#profileId-2877210