Punchout - Glass Joe

If you like this model let me know it with a boost 

Boost Me

As well as my other models you can resize this in X and Y but not in Z

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x198.93mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Sunlu Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA+ Sunlu Orange Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #13 (1.12mm) swap to Red
    At layer #18 (1.52mm) swap to Orange
    At layer #23 (1.92mm) swap to Jade White for the rest.