Kpop Demon Hunters - Huntr/X Members - Portraits

Adding onto the Kpop Demon Hunters. I wanted to celebrate each Huntr/X member with her individual portrait and bookmark. These art pieces differ from the movie. They are styled to comic book and manga art. 

KPOP Demon Hunters Members Portraits - One per plate.

Plate 1: Mira

Plate 2: Zoey

Plate 3: Rumi

Pictured are printed using an 0.4mm Nozzle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cobalt Blue Transmission Distance: 3.9

PLA BambuLab Basic Magenta Transmission Distance: 3

PLA BambuLab Basic Gold Transmission Distance: 5

PLA BambuLab Basic Jade White Transmission Distance: 4.6

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer (0.56mm) swap to Cobalt Blue

At layer (0.8mm) swap to Magenta

At layer (1.04mm) swap to Gold

At layer (1.28mm) swap to Jade White for the rest.
 

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.