Fishing bite indicator

This bite indicator has been designed for maximum flexibility and compactness. The indicator is held in place on the rod by a rail that clamps the rod. 

The special feature of this design is that the bell is attached with a screw, so that it can be removed or attached as required. The screw is an M2.5 screw. In addition, standard glow sticks can be inserted into the bite indicator. These can be easily inserted into the indicator on the left and right. The glow sticks must have a diameter of 4.5 mm. The arrangement has been chosen so that a glow stick is always visible when sitting to the right or left of the rod.

Key features at a glance:

Removable bell: The bell can be removed or attached as required using an M2.5 screw.

Up to 2 glow sticks: Bendable on the right and left sides of the bite indicator so that a bendable light is visible from each side. The glow stick holder was designed so that the glow stick does not disappear completely into the display, but protrudes from the side.

No support required during printing.

You can find further fishing accessories at the following link:

https://makerworld.com/de/collections/8343281-fishing-accessories