Japanese Torii Fountain

I would like to introduce my model of the traditional Torii gate in the Myojin style, which are found all over Japan, but in a slightly different form, in the form of a home or outdoor calming fountain, I'll leave that up to you.
The total height including the bowl is 22.5 cm.
The height of the gate itself is 13 cm and it is assembled into three parts together with a holder and a pipe for five.
Anyone who wants to can also use easily available tubes.
This fountain is made for a pump with a flow rate of 180l/h and does not have to run even at maximum and is easily available for around 100-150 CZK.
You can also get a solar one.
The parts are tightly connected to each other due to the flow rate, so don't be afraid to press them, but be careful not to break them.

We'll have to play around with the pipe a bit and maybe swear about the supports, but in the end it's not that difficult and the result is worth it. I'm attaching two versions.
Finally, I would like to point out that you can print a version with and without a handle for inserting the character. I used luck. :D
The entire fountain can be assembled, but anyone who wants to make sure can use glue.
If you want, you can of course make it bigger, which is not a problem, one to one, only the lower part of the pump handle would require a change or connection to the hose.
As for the bowl itself, I used PLA and made it strong enough so that it wouldn't leak, but there is a possibility that it could drip. Therefore, if you want to be sure, I recommend either a bowl or epoxy resin, which is also easily available and cheap, but if you're a little lucky, it won't be necessary (it doesn't leak) :D.
Finally, I just apologize for the shells, I didn't have any stones.
And if you mind the roaring water flow, just put some stones in the places that will prevent it.
Of course, I will continue to add modifications and improvements.

I think the assembly is so simple that there is no need for instructions.
I hope you like the idea and I wish you a nice day and printing.

mini ponorná pumpa má maximální kapacitu 95 galonů za - Temu Czech Republic