August 22, 2025
Description
This is a 100mm tall bookmark of the classic A Christmas Story leg lamp. It is done with 4 colors and takes less than an hour to print. You can make the print bigger by changing the X and Y sizes, but do not mess with the Z!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.67x100mm in size
Filaments Used:
PLA KingRoon Black Transmission Distance: 0.3
PLA KingRoon Brown Transmission Distance: 2
PLA KingRoonn Orange Transmission Distance: 5.5
PLA Kingroon Yellow Transmission Distance: 5.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Brown
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow for the rest.
License:
BY-NC
jason.matusiak
