Stacked Tracksaw Track Bracket - Ridgid

My tracksaw tracks were taking up lots of space, so I designed this modular bracket to hold multiple tracksaw tracks horizontally or vertically. 

All parts should fit together without being too tight. Feel free to superglue if needed (I didn't). Make sure the plate that you screw to the wall has good plate adhesion when printing as any upward curve will cause the cleat to be too tight.

If you want to use the end support, you should print the corresponding shim to go under the other bracket(s).

If you use a different brand of tracksaw and it works then let me know! If it doesn't then let me know the track width and thickness in mm and I'll try and update the model. This is a modified version of my Festool track holder.

If there are other brands with ~192mm tracks then let me know and I'll add them here.

Thanks to Michael for the photos.