Halloween Series : # 7 Pennywise the Clown

Project: It.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 122.7x219mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.56mm) swap to Blue Gray
    At layer #19 (0.88mm) swap to Grey
    At layer #35 (1.52mm) swap to White for the rest.