Bates House LightBox (Psycho) scale 1:87

I've always loved the design of the house from Psycho and other horror films. I looked for a printable model with a good level of detail, but unfortunately, none of them satisfied me; so I decided to create one with a high level of detail.
The model is made up of about 60 pieces and has many small parts, all of which were printed with my P1S with a 0.4 mm nozzle and a BL texture plate; th ematerial ued is PLA matte.
Due to the small parts, failures may occur if you don't carefully inspect everything before printing. Please check the cleanliness of the plate, the filament must be dry, the nozzle must be clean, and if necessary, increase the plate temperature for the first layer or use 0.2 mm nozzle. 
After printing the front logo, check for any micro gaps that could allow white light to filter through. Try filling the gaps with filler.

The model is distributed across 14 plates, all ca be printed witout AMS excluded  the front logo need.

The color of the light can be changed simply printing a disk with 53mm of diameter  0.4  thickness  directly on Bambu Studio.

 

The model is 1:87 scale can be used as miniature model  for diorama 

 

 

Additional material required 

-LED kit MH001 

-4 circular magnet 4x2mm

 

 

 

For any question or trouble please contac me, I will be happy to help you.

Boost MeIf you like my model, a boost will be a great help. Thanks