顺丰小货车&五十铃货车

嗨嗨嗨~ 这是我原创的ISUZU轻型货车模型，可玩性很高并且非常易于打印！

Hi~ This is my original ISUZU light truck model – super fun and incredibly easy to print!  
 

• 驾驶室兼容LEGO人偶😄
• The cabin is compatible with LEGO minifigures 😄  
• 货厢可开门，可收纳1:64比例小车 x2
• The cargo compartment features openable doors and can store at least two 1:64 scale model cars.  
• 不需要任何支撑，模型专为3D打印打磨优化
• No supports needed! The model is optimized for 3D printing and post-processing.  
• 一体式打印，只需要一点胶水或双面胶即可轻松组装
• Printed as one piece – easy to assemble with just a bit of glue or double-sided tape.  
• 轮胎可以滚动
• The wheels are rolling!  
• 两种模型：原厂版本 & 顺丰速运版本（需要AMS）

• Two versions available:  
  - Standard version  
  - SF Express version (AMS required for multi-color printing)  

   

🚧不建议缩小模型打印，大概率会导致货厢门打不开

      软件可能会提示模型有非流形边，无需理会，不影响打印效果

      默认设置为2层墙 & 15%填充，需要更高强度请自行调整

🚧 Not recommended to print at a smaller scale – the cargo doors may not open properly.  
      The software might show non-manifold edge warnings – you can ignore them; they won’t affect print quality.  
      Default settings: 2 walls & 15% infill. Adjust for higher strength if needed.

为我助力点击助力，给我动力！