Coca Cola Display box

Give Your Coke a Place of Honor!

This 3D-printed display box is made like a classic Coca-Cola can — the perfect way to show off your favorite Coke bottle, collectible, or limited-edition piece. With smooth magnetic doors and an LED-ready base, it turns your display into a glowing centerpiece for your bar, shelf, or office.

I designed it for my own collection, but now I’m sharing the files with fellow makers. You’ll get all STL files, a detailed assembly guide, a numbered parts diagram, and even a GIF that walks you through the full build.

Key Features

• Iconic Coca-Cola can shape
• Smooth, multi-level magnetic doors
• LED-ready base for dramatic lighting
• Fits bottles/collectibles up to:
  • Ø98 mm × 328 mm tall (~3.86" × 12.91")
• Fully 3D-printed — 43 parts
• Long build but worth it — strong, precise fit

What You’ll Need

Printed parts (43 total):

• 13 × Left door pieces
• 13 × Right door pieces
• 13 × Back wall pieces
• 1 × Top part
• 1 × Base
• 2 × Pins (for securing the top part)

Extra hardware:

• 2 × Ø6 mm rods, 345 mm long (~13.58") – steel or aluminum 
• 26 × 8 × 2 mm round magnets
• CA glue (superglue)
• Optional: Led Lamp Kit 001

Steel rods: Buy here >(affiliate link) 
This is an affiliate link — I may earn a small commission if you buy through it, at no extra cost to you. It helps support my future designs.

Magnets :   Buy via maker supply (affiliate link)

Printing Tips

• Nozzle: 0.4 mm
• Layer height: 0.2 mm
• Infill: 10% gyroid
• Supports: Yes, for some parts

Estimated Print Stats

• H2D printer: ~2d, 2h, 26m | ~1550 g filament
• Bambu P1 / X1: ~2d, 13h, 23m | ~1677 g filament

Build Notes

• Magnet polarity: Check before gluing to ensure proper door closure.
• Rod choice: Steel rods for stability and weight; aluminum for a lighter build.
• Scaling: Do not scale — rods and magnet holes are fixed for exact fit.

Instructions :

Remember to to follow me if you want to see my new designs.

Enjoy!