Predator Hueforge

Project: predator 200x200.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.7mm and the Actual Depth is 2.8mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Sunlu White Transmission Distance: 5
    PLA+ Sunlu Red Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Grey
    At layer #9 (0.8mm) swap to White
    At layer #17 (1.44mm) swap to Black
    At layer #21 (1.76mm) swap to Red
    At layer #31 (2.56mm) swap to White for the rest.