August 28, 2025
Description
🎃 A simple, Halloween-themed jack-o-lantern pumpkin fidget toy!
🍬 Keep yourself entertained during downtime or print a bunch to give out during Halloween or at Trunk or Treat!
👻 This has a basic, gyro-like fidget design with fun spinning action.
🐈 It prints in-place without supports, overhangs, or any bridges.
After printing, you may need to push its rings a few times to get them to loosen up. The more you play with it, the better it works!
💡 The print profiles have a “Standard” model with a 0.20mm gap between rings and a “Loose” model with a 0.30mm gap between rings.
The smaller gap helps with smoother movement and better motion, but you may have better luck when printing with a larger gap. Try the “Standard” version first, and then try the “Loose” version if you cannot move the rings.
Please let me know if you have any issues with the model printing solid, with no movement. This can be caused by some calibration issues with your printer or filament. I can upload versions with greater tolerances, if necessary.
Boost MeLike my work? A BOOST would be greatly appreciated! Thank you!
Halloween Pumpkin Fidget Changelog:
2025-10-09, 1.1.5
2025-09-17, 1.1.1
2025-08-30, 1.0.1
2025-08-28, 1.0
Created from scratch using FreeCAD.
License:
Standard Digital File License
BitingChaos
