Beagle Bros. Black and White Logo

Being a child of the late 70's and early 80's, I grew up around the 8 bit computers of the era, and was one of the lucky teenagers to have an Apple ][+ back in the day. Beagle Bros. Software, and Apple ][+ and //e machines were a big deal to many of us in that timeframe, and I decided to make a few HueForge prints to add to many others I've made.  These are my first ones that I've uploaded, although I have created quite a few others. Enjoy!

All of these models may be scaled on the X and Y axis, but to not scale the Z axis. They MUST be printed at 0.08 layer height, and color changes will have to be manually added for those without Bambu Lab printers.  These can be printed on any printer that a pause and color change can be inserted on the slicer.  This print will require a plate size that at least 255 mm x 255 mm. Larger plates are, of course, acceptable. 

DO NOT SIMPLIFY THE MODEL OR ADD SUPPORTS no matter what your slicer tells you.

Project: Beagle Bros Logo BW
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x225.42mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    PLA Sunlu Black 
    PLA Jayo Dark Grey
    PLA Sunlu Marble
    PLA Sunlu White 
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Grey
    At layer #15 (1.28mm) swap to Marble
    At layer #22 (1.84mm) swap to White for the rest.