Biscoff Fridge Magnet

I Was bored and thought of this. It's a simple fridge magnet in the shape of a Biscoff Cookie. This was pretty simple to design. I just traced an image of a biscoff cookie in Fusion360, then did some magnet magic in Bambu Studio and it was done. This can hold moderately heavy pictures or card stock. But I wouldn't recommend trying to hang anything that you wouldn't normally use a fridge magnet for. Of course you could also just use it for display. The print itself is pretty simple. It only takes a little under 25 minutes and 8 grams of filament with a pause on layer 13 so you can insert the magnet. The tolerances for the magnet were meant to be tight but not crazy tight. So you have to use a little force to get the magnet in. Once the magnet is in securely just press resume and you're good to go. The magnet I modeled this after are the 8x2 magnets from Bambu Lab. But I can make versions for other sized magnets if requested. 

 

As always please let me know if you have any questions, concerns, comments, etc.

 

Enjoy,

 

Leopardgeckoguy 

 

Boost MeLike this model or any of my others? Boosting me really helps push me to continue making awesome models.