Snoopy Bookmark

Snoopy Bookmark

Shown printed with a .4 mm nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    #080a0d PLA BambuLab Basic Black
    #00358e PLA BambuLab Basic Blue
    #ffffff PLA BambuLab Basic Jade White
    #c00d1e PLA BambuLab Basic Red
    #00ae42 PLA BambuLab Basic BambuLab Green
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Blue
    At layer #11 (0.96mm) swap to Jade White
    At layer #17 (1.44mm) swap to Red
    At layer #24 (2mm) swap to BambuLab Green for the rest.

You can resize the model to fit your printer or preference by scaling the X and Y axes by the same percentage while keeping the Z axis at 100%. The easiest way to do this is:

1. Enable Uniform Scale and adjust the Y axis to your desired size (this will automatically scale the X axis proportionally).
2. Disable Uniform Scale and reset the Z axis to 100%.
3. Slice the plate and print.

Note: When using Hueforge, some stringing may occur. A quick pass with a lighter will remove them cleanly.