Heated clothes dryer airer hanger extension

If you have a heated airer, you may want to add some extra hanging space for things that dry better on a hanger.  These clips fix onto the uprights of a groundlevel airer.  Will probably fit others too if the uprights are the same size.   The larger one fits a 30mm diameter upright and the smaller one a 16mm upright.  If you print in PET-G they are strong enough and flexible enough to just clip on and off.  Can also swivel round if you want to leave them fitted but not always sticking out. 

 

Mine printed fine with 0.2mm strength settings. bumpy side down.  Slicer will probably complain about a cantilever as there is a slight discrepancy in the lower face that I could not fix.  Still prints fine if you ignore the error. 

 

I have 3 plates.  They fit fine on an A1Mini.

1. Just the big one for a 30mm upright
2. Just the small one for a 16mm upright
3. Both a big and a small one

Boost MeI'd really appreciate any boosts or comments for this model so I know how to improve it for next version.