迷你钳子Mini Pliers

中文：

这是一个迷你钳子，单手操作，由于平时我有一些需要细小部件的上色涂鸦，有时侯拿不稳，就很需要这个！使用这个迷你钳子的时候可以让我更加精确的进行作业。

注意：由于不同打印机的工作状况可能不同，在打印后发现太紧或者太松，推荐调整质量/精度/里的X-Y内外轮廓尺寸补偿，数值在0.08到0.13/-0.08到-0.13之间，最好不要超过这个数值，打印配置里的是我打印出来合适的数值。

推荐：使用PLA打印。

English:

This is a mini clamp designed for one-handed operation. Since I often work on painting and detailing small components and sometimes have trouble holding them steady, this mini clamp is essential for me! It allows for much greater precision during detailed work.

Note: As performance may vary between different printers, if you find the clamp is too tight or too loose after printing, it is recommended to adjust the X-Y Contour Size Compensation value under the Quality/Precision settings. A value between 0.08 and 0.13or -0.08 to -0.13 is suggested. Try to stay within this range for optimal results. The value currently set in the print profile is what worked well for my printer.

Recommended: PLA.