Lightest Gridfinity Covers Possible

Summary

A fully skeletonized Gridfinity Cover made entirely of walls! Prints flat on the build plate for 0 overhangs. 

• There are only 1-grid-wide covers because you can make any shape with multiple 1-wide covers. A 2x2 cover will limit you. 

Nozzles

• Use a 0.8 nozzle to print this in only 1 wall. 0.32mm layer height recommended.
• 0.4 works as well but you'll need 2 walls. 0.28mm layer height recommended.

Boost MeI'm obsessed with using the least possible filament to get the job done. If that sounds cool to you then a boost would be great :)

 

See my Lightest Gridfinity Base Plate Model Here