Chelsea F.C.

AMS required

Logo diameter: 15cm 

Height with base: 16.8cm

Update 11.09.2025: I have improved the connectors and added a profile for printers with two AMS units.

The model requires glue for assembly (e.g. superglue).

For printing the logo parts, I recommend using a smooth PEI plate (it will be easier to glue them if the back is smooth). The base can be printed on a textured plate.

Since the logo consists of 6 colors, I have published three profiles.

1. First profile (5-color) for the H2D printer with 1 AMS unit:
The logo consists of two parts. Insert the smaller part into the larger one, then glue them together (make sure to remove any excess glue so the back stays smooth).
Next, insert the connectors on one side of the logo, glue both sides together, and finally attach it to the base.

2. Second profile (4-color) for other printers with 1 AMS unit:
The logo consists of two parts. First, glue the tongue to the smaller part.
Then insert the smaller part into the larger one and glue them together (make sure to remove any excess glue so the back stays smooth).
Next, insert the connectors on one side of the logo, glue both sides together, and finally attach it to the base.

3. Third profile (6-color) for printers with 2 AMS units:
Insert the connectors on one side of the logo, glue both sides together, and finally attach it to the base.