Pet Urn Keepsake

This is a customizable pet keepsake for your beloved family member who has passed.  Each side is fully customizable, with three types of windows. The light fits snugly in the back wall and conceals the cord from the keepsake. It has a cord wrap as well in case there are times you are unable to plug in. The top is also customizable to be a base black or a color of your choosing. To showcase a small heart within a paw surrounded by angel wings (suggested .2 nozzle for better detail). This keepsake is a perfect gift for a loved one who may want something special and unique for their pet that they may be missing. 

*Additional Custom tops to come

Container Volume = About 55 cubic inches (it should be able to hold a loved one weighing about 55lbs) 

*Larger Containers to be added in the future for larger breeds

Parts List

-Printed-

1X - Bottom

1X -  Base

1X - Top

1X - Back (Single or Double)

1-2X - Cord Wrap('s) Depending on which back is chosen

16X - Plugs

3X - Windows 

3x - Window inserts (varies based on customization) 

1X - Container

1X - Container Lid

X - Lithophane (optional)

-Purchased/Consumable -

Fine paint brush (optional)

Super Glue or PLA Gloop

Screws - 6X M3 X 6 Pan head machine screws

Feet - https://www.amazon.com/dp/B07T7GHFQS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1 

Light - https://www.amazon.com/dp/B0DHH4JZWW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 

Acrylic White with Black (Laser)

51017 Gravoply - 1/32" thk  - I used this brand, but other brands are widely available.

Acrylic Clear  (Laser)

Size 4.7" x 3.75" x .12" Thick

https://www.amazon.com/dp/B0BHSCPS3K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 

Lithophane (For custom images)

113mm x 97mm x 3.5mm

Assembly Instructions

• Place your loved one's ashes into the container. I suggest gluing it shut to prevent any accidental spillage.
• Attach the feet to the Bottom with 4 screws.
• Find each window and insert, place the inserts in the grooves, and use the adhesive (with a brush) to adhere the insert to the window. I run the brush along the outer seam to hide it from the finished side.  Set aside and allow it to cure.
• Find the back and cord wrap('s), apply adhesive to the slot, and allow time to cure. 
• Take the windows, back, and plugs and snap them into place. Adehesive can be applied in the holes for a permanent connection. Please take care of the placement of your windows in relation the the back of the box. PETG is recommended for the plugs, but it's not necessary. PLA will work, but has a higher risk of failure. 
• Insert your pictures, lithophane, or poems into the windows
• Attach the Base to the Top with 2 screws
• Place your container in the slot. It is not a tight fit, but the slot will keep it in place if the box were to drop. If there is worry that it may fall out, then place a few drops of adhesive along the slot to ensure that it stays.
• Attach the Base to the bottom with the remaining 2 screws. Keep in mind to run your cord through the provided slot.