September 4, 2025
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Jade White
At layer #19 (1.6mm) swap to Turquoise
At layer #20 (1.68mm) swap to Black
At layer #21 (1.76mm) swap to Red for the rest.
License:
Standard Digital File License
S1M0N389
