Modern Indoor Plant Pot - Geometric Planter

🎯 Recommended Print Settings
For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8-15% infill for a solid, lightweight print that won’t use too much material.

Note for Printing:
Tree supports are enabled and only needed for the bottom part of the planter.

If you’re using Orca Slicer, enable “Make Overhang Printable” (Quality > Overhangs) to avoid supports completely.
Bambu Studio doesn’t have this feature yet, so supports may still be required there.

You can scale the model to your preferred size.

⚡ Speed vs. Quality Trade-off
The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. The larger nozzle won’t affect the strength, and the prints still look awesome