DJI Mini 3/4 Pro Fly More Case v2

A Rugged Box for the Mini 4 Pro Fly More Combo and the DJI RC 2 equipped with a Sunhood.
 

It's based on my "DJI Mini 3 / 4 Fly More Case":
https://makerworld.com/en/models/1439312-dji-mini-3-4-fly-more-case#profileId-1497773

The Rugged Box itself is an adaptation of "Rugged Box (Parametric)" on Printables:
https://www.printables.com/model/258431-rugged-box-parametric

External dimensions:
236.8 x 137.7 x 181.8 (152.4+29.4) mm
 

With the use of the provided shims (green), all Mini 3 to Mini 4 controllers fit ( and most likely the upcomming Mini 5 too).

Most likely the DJI RC (for the Mini 3) equipped with a Sunhood fits as well.
In Bambu Studio use the "Lay on Face" & "Cut" commands on the Inlay/Interior to print a test piece.
If it fits you can print the "Mini3Pro Inlay part" on Plate #4 from:
https://makerworld.com/en/models/1439312-dji-mini-3-4-fly-more-case#profileId-1497773

The width of the Strap Buckle is parametric.
The provided Print Profile is 25mm.

The Sunhood used:
'RC 2/RC Controller Sun Hood Cover for DJI Mini 4 Pro, DJI RC 2 Joysticks Protector for DJI Ari 3/ Mini 4 Pro Drone Accessories'
https://nl.aliexpress.com/item/1005006403970009.html

Hardware:
6 pcs Screw M3 x 40mm
1 Strap 30 x 3mm (max) L=900mm
4 pcs Rubber feet or printed in TPU