The Union Pacific Railroad Coal Car

I designed this model to act as a rail-themed poop collector under the A1. I must find another use as my A1 is returning to meet its maker.

What else could this be? Well, it makes a great catch-all basket on the desk, and it could be used to store candies on the desk or as a small, open trash can. Maybe it holds nuts for squirrels, IDK. 🤷

As a lover of railways 🛤️ and all things American 🇺🇸, this is a model that I am happy to have on my desk even if it does nothing.

When printed and assembled, this model is 204mm wide x 57mm deep, and 82mm high. All parts clip together, and no glue is required. The wheels and bogie will freely move. Feel free to scale it upwards if you like, but I would urge you not to scale it downwards.

Thanks for downloading this and printing it. Be sure to leave a 'like', a positive comment and a whole heap of stars. If you have issues, please reach out to me for help (Direct message through the Bambu App or website).

Please look through my profile for my other models, too!

ASSEMBLY:

1. Remove the brims from the connector pins, bogey and the wheels.
2. Remove the brims and the support material (3 pieces inside the body) from the main body.
3. Connect each wheel to the bogies by positioning the wheel with the flange towards the inside and then pushing the connector pin through the hole in the bogie and then through the wheel. You may need to back the pin out a little so that the wheel is still free to rotate.
4. Add each bogie to the main body by placing it over the connector pin and pressing. NOTE: If the wheels are hitting the body, then take it off again, spin it 180 degrees and put it back on.