Yoru - Chainsaw Man - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 139.99x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Dark Gray
    At layer #15 (1.28mm) swap to Ash Gray
    At layer #21 (1.76mm) swap to Ivory White for the rest.