Whispers of the Dead – Glowing Shelf Decor

💀 Whispers of the Dead – Glowing Shelf Decor 🌼

✨ A Día de los Muertos Lighted Portrait

🌸 Celebrate life, memory, and tradition with a glowing altar-ready display that honors the spirit of Día de los Muertos.

 

🧪 Category: Festivities, Shelf Décor & Illuminated Portraits
🔩 Assembly: Brass Screws & Lithophane LED Backlight Board Kit
⚙️ Difficulty: Beginner-Friendly — Designed for First-Time 3D Printers

 

🎬 “LET THE SPIRITS GLOW BRIGHT, ONE PORTRAIT AT A TIME!”

Looking for a decoration that’s more than just art? This glowing shelf portrait captures the essence of Día de los Muertos, with sugar-skull style detail and a radiant light that shines through. Place it on your altar, your shelf, or your mantle — the glow transforms your space into a vibrant celebration of remembrance.

✨ Features

• 🌼 A radiant Día de los Muertos design that glows with LED backlighting.
• 💡 Simple USB-powered light for safe, lasting glow.
• 🔧 Beginner-friendly assembly — no advanced skills required.
• 🎨 Flexible printing options: PLA or PETG, embellished or simple cover.

🛠️ Assembly Guide

1. Choose your print style
   • Print the PLA version or the PETG version of the portrait.
   • You only need filament for the style you select.
2. Choose your cover
   • Select the Embellished version or the Non-embellished version.
3. Print all components.
4. Prepare the cover
   • Lay the cover face down on a flat surface.
   • Keep the cord hole at the 6 o’clock position.
5. Insert the layers
   • Place the printed image.
   • Insert the diffuser (flat side against the image).
   • Insert the two lithophane LED panels with LEDs facing the image.
6. Wire the light
   • Use the jumper cable from the lithophane kit to link the panels.
   • Insert the USB cable at the 5 o’clock position.
   • Tie a strain-relief knot so the cable can’t pull free.
   • Lay the cable neatly in its slot.
7. Seal it up
   • Insert the back cover (pegs facing LEDs).
   • Secure with 8 × #2 × 3/8-in brass screws.
   • Confirm the cable sits safely in its channel.
8. Glow & enjoy
   • Place it on a shelf.
   • Plug it in.
   • Enjoy the radiant glow of remembrance.

👶 Beginner-Friendly Breakdown

Section	Difficulty	Notes
3D Printing Parts	🟩 Easy	PLA or PETG portrait + cover style
LED Panel Insert	🟨 Easy	Panels face inward toward image
USB Cable & Wiring	🟨 Easy	Tie strain relief knot, slot cable
Back Cover & Screws	🟩 Easy	Brass screws secure the case

 

🎓 Tip for Makers: Want extra festival flair? Print the cover in bright colors — orange for marigolds, pink for sugar skull vibrancy, or even mix filaments for layered glow.

 

👊 READY TO LIGHT UP DÍA DE LOS MUERTOS?
🖨️ Print your portrait and cover.
🔩 Assemble with diffuser, LED panels & screws.
✨ Plug in via USB.
😎 Bask in the glow of tradition.

 

📸 Don’t forget to share your glowing portraits! Show off your colors, setups, and altars.

 

👾 Tag your build with #WhispersOfTheDead so the MakerWorld community can see how you celebrate the season.

 

 

Boost MeBring this Día de los Muertos masterpiece to life on your shelf! 💀🌼 Whispers of the Dead – Glowing Shelf Decor is beginner-friendly, prints in PLA or PETG, and lights up with the Bambu Lab Lithophane LED Backlight Kit. ✨

Your likes, follows, and boosts keep us excited to build more, share more, and keep the MakerWorld magic glowing strong. ⚡