Sifli AI Box 外壳 v1.0

Sifli AI Box 外壳 v1.0

Sifli AI Box 是一个采用“立创开源SF32LB52模组”的小智AI机器人项目，根据嘉立创的“插件版小智AI项目” (以下简称原项目) 改进而来。

项目组成

本项目开源内容包括三部分：

• 硬件：请参考立创开源硬件平台的项目。
• 软件：请参考GitHub项目。
• 3D打印：请参考本项目。

特点

相比于原项目的外壳，本项目有以下特点：

• 设计了全新的外观，适配改进的电路板设计，但仍适配原项目电路板的尺寸。
• 简化了结构，包括前部盖板、后部外壳、LCD屏幕支架、5向按键，共4个部件。
• 外壳组装采用卡扣设计，不需要螺丝。

打印与组装建议

• 使用 PLA 和 PETG 均可以打印。建议采用透明 PETG 低速高温打印前部盖板，这样可以使电路板上的LED指示灯的光透出来，否则需要单独开孔。
• 采用M3螺丝固定电路板。
• 采用M2螺丝固定LCD屏幕支架。
• 采用双面胶固定电池和腔体喇叭到后部外壳。

如果这个设计帮助到了您，请帮忙助力或点赞。如果有改进建议，也欢迎留言。

祝打印快乐！

=============================

Shell for Sifli AI Box v1.0

The Sifli AI Box is a Xiaozhi AI project utilizing the "JLC Open Source SF32LB52 Module", improved from LCEDA's "Discrete Component Version of Xiaozhi AI Project" (referred to as the original project).

This open-source project consists of three parts:

• Hardware: Please refer to the project on LCEDA Open-Source Hardware platform.
• Software: Please refer to the GitHub project.
• 3D Printing: Please refer to this project.

Features

Compared to the shell of the original project, this project offers the following improvements:

• Features a completely new design that accommodates the improved PCB layout while maintaining compatibility with the original project's board dimensions.
• Simplified structure consisting of only 4 components: front cover, rear box, LCD screen support, and a button for 5-way switch.
• Snap-fit assembly design that requires no screws for enclosure assembly.

Printing and Assembly Recommendations

• Both PLA and PETG can be used for printing. We recommend using transparent PETG with low-speed, high-temperature settings for the front cover to allow the light of the LED indicators on the PCB to shine through; otherwise, you need to drill separate holes.
• Use M3 screws to secure the PCB.
• Use M2 screws to secure the LCD screen support.
• Use double-sided tape to attach the battery and cavity speaker to the rear box.

If this design helps you, please Boost it or click Like. Comments for improvements are welcome.

Happy printing!