Reckoners Board Game Insert

This is a board game insert for Reckoners
The Reckoners | Board Game | BoardGameGeek

This game is amazing and I received it after the expansion content came out. The core box alone has a good insert, but it wasn't designed to incorporate the expansion at all which left you with a smaller awkward box to store everything. Since I now always include the expansion content, this insert resolves the problem by getting everything with sleeves into a single box with a setup faster than before. There is room for all the player, location, tracker trays required in the game. I used the sleeves that came with the deluxe version of the game.

All should print on a normal .2 profile with one exception. There is a tracker container where I wanted an uneven bottom to straddle the bottom player and location trays. I included a version which won't need supports which works fine but won't lay in the box as flat. I found though that with a support interface layer (set in the 3mf profile) it print really cleanly. I used the Bambu support for PLA / PETG filament, but just using PETG if you print PLA should be fine for that interface. Or don't bother as it doesn't show and use PLA for support and scrape it off.