Greek Inspired Jewelry - Choker, Arm Bangle, Band

If you are a fan of removing very small supports from very delicate models, then this is for you!  

If you don't have patience or are afraid to waste a few grams of filament, then please skip.  I wanted to test the limits of printing delicate jewelry and printing it thin has it's trade-offs.  

There are a few versions available to download but the open version is the most difficult.  Not necessarily to print, but to remove the supports.  DON'T PRINT THE OPEN VERSION IN PLA (well maybe PLA+).  I was successful when using PETG.  Pinch the design while you remove the supports.  And don't try to pop it off the plate by flex the plate.  

The filled inversion can be printed in any filament.  I also provided a two-color version.  

Off all the models, I provided multiple thicknesses so if you choose to reduce the size of the model, you can choose one that is thick enough where the finished model has enough material to print successfully.  I printed down to 80mm with the 6mm thick version with no problem.  

Best of luck!