Articulated DeadPool Lady Figure AMS Not Required

This is the deadpool lady. If you've printed and assembled my previous models, this will be easy to assemble.

Successfully printed on X1C, P1S, 0.4 nozzle, 0.2 layer height, PLA, PETG, Bambu Cool Plate SuperTack without any issues

The assembly manual is not uploaded separately. Please refer to the YouTube video.

Since the limb parts have a relatively small base bonding area compared to their output height, we recommend using a strong build plate such as SuperTak.

Especially for bed slinger types such as A1 and A1 Mini, the probability of output failure is higher

Because each user's printer condition and materials are different, some users may be able to print and assemble without any problems, while others may experience problems.

This is a model assembled without AMS, so be careful not to get confused as there are a lot of parts.

If you encounter any printing issues, we recommend downloading the profile and reprinting only the problematic parts separately in PC Bambu Studio.

If you encounter assembly issues, try adjusting the XY tolerances slightly and reprinting.

If you have trouble assembling the parts below, try printing with the XY Hole compensation of both parts set to 0.1.

I can't support everyone individually, but I think it will take some effort and trial and error.

I hope you enjoy it.