Heavyduty Landscape Fabric Staples / Pins / Stakes

Keep your garden neat and secure with these 3D printable landscape fabric staples, garden stakes, and weed barrier pins. Designed for easy printing and long-lasting use, these ground anchors are perfect for holding down landscape fabric, weed barrier cloth, garden netting, or tarps.

These stakes might also be used as tent stakes or camping pegs. This idea has not been tested, so use with caution. Since they are 3D printable, you can experiment with different sizes or materials to adapt them for creative outdoor uses.

Features:

• Strong & reusable design – a sustainable alternative to single-use metal staples
• 4 length options – print the size you need (100 / 150 / 200 / 240 mm)
• Multi-purpose use – ideal as garden stakes, landscape pegs, or ground anchors
• Print-friendly model – optimized for 3D printing without supports

Recommended Print Settings:

• Filament: PETG or sturdier filaments (PLA not recommended)
• Layer height: 0.28 mm
• Infill: walls only
• Supports: Not required 

Note: When I tested this model, the PETG stakes proved strong enough to be hammered into the ground with a regular metal hammer. However, be careful: always strike the flat head of the stake directly. If you hit the overhanging side parts, they may snap off.