Halloween Toxic Pumpkin

Please rate if you print, this really helps me, thank you

 

For A1 mini, you can rezise but never change the Z-AXIS

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 123.47x180mm in size

You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Prusament Galaxy Green Transmission Distance: 3.2
    PLA BambuLab Basic Yellow Transmission Distance: 5.9

This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Galaxy Green
    At layer #23 (1.92mm) swap to Yellow for the rest.
 

Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot.

Thank you and enjoy the print