MiniMeasur

PLEASE READ THIS IS IMPORTANT

 

I have added a version for those without an AMS system to be able to use the multi-color MiniMeasur model. There is a planned pause set around the 15:30-16:00 mark letting you swap filament rolls. To do this you must follow these instructions PERFECTLY. 

• When it pauses, let the nozzle cool for 1-2 minutes. (Makes the process easier)
• After letting the nozzle cool, press the filament cutter on the RIGHT SIDE of the print head 2-3 times for a perfect cut. (For the A series only from what I know.)
• Once you press the cutter, there is a gear release lever to the LEFT of the PTFE tube input to the print head. PRESS IT (Again, for the A series only for what I know)
• While holding the release lever, pull the filament out of the tube from the roll for an easy releasing process.
• Input new filament into the tube far enough for the gears in the print head to grab it.
• Press Continue Print and you will receive a multicolor MiniMeasur caliper, WITH a bleeding color design. (I am aware that it pauses a layer before the marks and letters. I left it because of the fact of the color bleed.)

 

The MiniMeasur is a compact and convenient 80mm ruler/caliper, fitting any toolkit, desk space, or workbench. Its clear markings and durable build make it a go-to choice for quick measurements and travel modeling. Its slim design also makes it an easy fit for tight spaces like a pencil case, a travel case, and even your pocket! 

Boost MeLike this model and my others? Support me by boosting!! It keeps me modeling for you!