Goku Hueforge - Dragon Ball Z

Boost MeUn petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️MembershipAvec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci ! With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!

Soyez vigilant si vous utilisez un PLA différent de celui indiqué, les niveaux de distance de transmission peuvent varier et ainsi affecter le résultat.

Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.

 

Project: All Goku.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

 

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA Bambulab Litho Cyan  Transmission Distance: 1.7
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 4.5
    PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Cyan
    At layer #11 (0.96mm) swap to Black
    At layer #12 (1.04mm) swap to Red
    At layer #16 (1.36mm) swap to Yellow
    At layer #17 (1.44mm) swap to Jade White
    At layer #20 (1.68mm) swap to Yellow
    At layer #23 (1.92mm) swap to Jade White  for the rest.

 

Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo

How to print more than 4 colours with a single AMS: from 42 sec onwards in the video