DeWalt / Kreg Track Saw Slide

Hey Everyone!

So I've had a few people ask about the track saw guide i designed awhile back. I have decided to post it again. It is set up to work with the DeWalt DCS 565 6 ½ 20 volt circular saw and the Kreg ACS 62 in guide. I'm not sure of other fitments so you may have to do a little research for compatibility if your saw is different. I spent a little extra time with R&D and can say the blade lines up perfectly with the guide edge.  I have used mine on several occasions with great results!

 The seams were set to random in the photo, I have corrected that issue and it prints smooth now

Warning: the guard is held open exposing the blade, use caution when cutting. 

Dimensions:

7in W x 12 in L x 1 in H (yes it will print on a 250mm bed)

Print Specifications:

PLA

0.4mm nozzle 

0.2 mm layer height

3 wall loops

15% infill

support where needed

brims

Supplies:

10-24 X ½ Set Screw

Amazon Link: 

https://www.amazon.com/gp/product/B0CY92YGKF/ref=ox_sc_saved_title_3?smid=A1HMN9CDMC3TAC&th=1

10-24 Tap

Amazon Link:

https://www.amazon.com/Bosch-BPT1024-10-24-High-Carbon-Machine/dp/B07GRP82T9/ref=sr_1_5?crid=37IVKFD6DGL1G&dib=eyJ2IjoiMSJ9.e5I-0wcG3hgL10QZ3fQKSYfUscgSPaCBa2By_JLT_geiQ6GrfofZ8CEgq4XkQ4-6FmDyR2x5Ru-8cDauilXbczZx4adP0N_2IelEhpHNSunLYvVwezRKpvXGHIlEJA1h6q5iWTUdJAl0KC1yVzVRVGOvhj2sX3ziXDcQB1ip7kzm-YUl1h9vgfVUoJxLTV0qlwbeWciGOQgzrHjz33ujANXAEQ93Dw5ww2ortC7p8K0.AbPkfl6aqLuPU7BPMJ7HoXUnAeoVlIslBq2mVClEbOY&dib_tag=se&keywords=10-24%2Btap&qid=1757524314&sprefix=10-24%2Btap%2Caps%2C230&sr=8-5&th=1

Notes:

The hole for the set screw needs to be threaded. I  put just a tiny amount of blue Loctite for good measure.