PokeBall inspired Wall Shelf – Pokemon (No AMS)

This wall-mounted, Poké Ball–style shelf prints as four separate pieces: three outer segments and a center ring printed on its own

After printing, the outer segments are aligned and glued edge-to-edge; the center ring is then bonded last for a clean, symmetric finish. 

The design is optimized for single-color printing without AMS and keeps the classic vertical look with red on top and white on the bottom. 

Assembly is straightforward thanks to a purpose-made recess for the center ring. 

The recess and ring maintain a consistent 1 mm clearance, ensuring a smooth slip fit even with minor printer variances, material shrinkage, or surface finish differences. 

 Use cyanoacrylate (CA / Superglue) or two-part epoxy to glue the parts.

3 beds - each for the colors. Lower part prints together with a center ring, both in white.

Here is a assembly video: 

Please support my design if you like it <3

You can buy a commercial license for my models for $500 one time payment.