Upgrade your Team Associated 1/28 model with a true front suspension kit!
Boost MeWant more free STLs like this? Consider boosting me!
Installation video:
Features
Drop in design.
Eliminates the drooping issue caused by the factory plastic settling over time.
Adjustable ride height and spring preload.
Optimized geometry allows for better toe and camber control across the suspension's full range of motion.
Compatibility
Fits all Team Associated 1/28 models since they share the same chassis (SC28, DR28, HR28, F28, MT28, CR28, TR28).
NOTE: I designed this kit around the SC28 body. Some bodies that sit lower to the chassis may require adjustment or modification to the body posts to clear the shock towers.
Required Hardware
(4) - M1.4 x 10mm screws
(12) - 1.5 x 10mm dowel pins
You could use screws instead of dowel pins, but I find that dowel pins give smoother motion.
(2) - 5mm OD x 15mm free length x 0.5mm wire diameter compression springs
Version History
V1.0 - (9/12/2025) - Initial release
V1.1 - (9/13/2025) - Fixed outdated bulkhead and hub files. Added small “I” embosses to the suspension arms. The “I” should be placed closest to the bulkhead / center of chassis.
Engineered Layers
