Locker Pen Holder

Stay organized with this locker pen holder that has the option for four 8x2 mm magnets recessed into the back to attach to the inside door of a metal locker at school, the gym, a refrigerator, etc. Has three individual compartments to hold pens, pencils, markers, etc. Works best with only these items as I haven't tested other objects to fit and stay attached with magnets on metal. It's possible to stick 3M Velcro command strips to the back if magnets are not an option.

 

 

I hope you are able to print this model and find some use out of it. If you decide to print, please offer a free boost for your support, a rating, pics, and any feed back is welcome. Thanks

 

Measurements are: 

• Outside is 120 mm length x 45 mm depth x 103.19 mm back wall height
• Inside two outer compartments are 25 mm wide x 39 mm depth x approx. 98 mm back wall height

• Inside middle compartment is 58 mm wide x 39 mm depth x  98 mm back wall height

   

Supplies needed:

• Four 8x2 mm magnets super glued in place (see Bambu Labs link to buy the magnets)
• Optional four 3M Velcro command strips
• PLA, PLA+, or PETG filaments work best 

Boost MeIf you like this model and want to support this creation, please give a rating, comment, or a boost. ThanksMembershipTo support my current and future model designs, consider purchasing a commercial license from the link in my profile.

 

Buy Me A Coffee

https://buymeacoffee.com/foxmt406