All Might My Hero Accademia Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.86x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #11 (0.96mm) swap to Jade White
    At layer #15 (1.28mm) swap to Yellow
    At layer #21 (1.76mm) swap to Black
    At layer #22 (1.84mm) swap to Red for the rest.