VW Caddy Mk1

The original VW Caddy shared the same platform as the VW Golf mk1 so thought I'd make a remix of Kocyns excellent VW Golf Mk1 model.

This model features all new sides, rear, roof and chassis. The interior, front end and wheels are shared with the Golf model.


Profiles

- 0.2mm full colour / AMS. This is my recommend profile to maximise the detail of this model while minimising colour change waste.  Included is a 2nd rear tailgate with the lights in place - this will obviously produce a lot more waste.

- 0.4mm single colour. As it says on the tin, a single colour profile.
 

Assembly
Assembly is possible without glue, but it's a challenge!

Before attempting to fully assemble, I recommend dry fitting all parts to all parts individually to check for fit (you may need to deburr edges if you didn't get a clean print).
Once you've tried the fit of all pieces you can then try the full assembly - although I would recommend using a tiny bit of glue to help hold the interior pieces in place and then build from there.

If printing the 0.2mm colour profile you need to glue in place the rear lights and front indicators