Fishing Pole Double Reel for Claw Game

Double reel system made to mount to a normal fishing pole and work with my mechanical Claw Game Print. It has some slip between the 2 reels so when you reel up on one side the claw is open and reel on the other side and the claw will close.

It does require assembly but no hardware other than a fishing pole first section and some string. (I found that the stiff bottom part works better than the whole pole because it is less flexible)

Assembly instructions:

1. Print out all of the parts
2. Thread on the yellow axle onto one side reel.
3. Slide the axle through the center holder
4. Thread the yellow axle onto the other side reel
5. thread the handles through the holes in each of the reels
6. slide the string guide onto the end of the center holder and slide into place.
7. install the parts onto the fishing pole 
8. Put some string onto the loop on each reel, tie in place and reel up
9. Attach the string to the 2 parts of the claw. May need some adjustment to the length to tune it to open or close with each reel.