MASS硬盘仓适配背板MASS HDD Tray Backplate Adapter

MASS 这个机箱设计的太好了，但是硬盘仓没法适配背板是个遗憾，所以制作了这一款适配背板的硬盘底仓。

我第一次打印MASSFREE硬盘仓的时候吃了大亏，实话实说支撑优化的实在太烂了，非常难受。

所以就对硬盘底仓模型进行了修改和优化。

硬盘仓V2版本可以适配星际蜗牛B型背板。

底部适配风扇尺寸为12015或14015, 25厘米的风扇被我砍了，因为风扇位的那个桥接实在是太脆了，一压就碎，所以只能加固一下。

重新对孔洞布局进行了支撑优化，现在打印下来支撑料不会消耗特别多了。

当然，底座的风扇盖我懒得再做了。。留给有缘人来接力完善吧。

还有就是底座也被我废了，因为我自己测试下来并不稳，还不如直接硬盘仓落地。

此硬盘仓设计不可商用，特此声明。

The MASS case is incredibly well-designed, but it's a shame that the hard drive bay wasn't compatible with a backplane. That's why I created this bottom-mounted hard drive bay adapter.

The first time I printed the MASS-Free hard drive bay, I learned the hard way—frankly, the support structure was terribly optimized, making it a really frustrating experience. So, I modified and improved the model for the hard drive bay.

The V2 version of the hard drive bay is compatible with the (Star Nas) Type B backplane.
The bottom part supports fans sized 12015 or 14015. I scrapped the 25cm fan option because the bridge for the fan mount was too fragile—it cracked under the slightest pressure. Instead, I reinforced that area.

I also reworked the hole layout and optimized the support structure. Now, printing it won’t consume an excessive amount of support material.

That said, I didn’t bother redesigning the fan cover for the base—I’ll leave that for someone else to improve upon.
Additionally, I discarded the original base design because, during my tests, it wasn’t stable enough. It works better to just let the hard drive bay sit directly on the surface.

Note: This hard drive bay design is not authorized for commercial use. This is hereby explicitly stated.